BMSPM - PLASTIC CLEANER PN 403D

  • MSDS: BMSPM
  • Manufacturer: PERMATEX INDUSTRIAL
  • Product Name: PLASTIC CLEANER PN 403D
  • National Stock Number: 7930-00-935-3794
Product Identification

Product ID:PLASTIC CLEANER PN 403D
MSDS Date:10/01/1985
FSC:7930
NIIN:00-935-3794
MSDS Number: BMSPM

Responsible Party
PERMATEX INDUSTRIAL
22150 W. SMILE
SOUTH FIELD, MI 48037
US

Preparer: MARTIN HAUSER

Cage: 62377

Contractor
PERMATEX INDUSTRIAL
HARTFORD, CT 06106 US

Telephone: 877-376-2839

Cage: 62377

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 60-70%


PETROLEUM DISTILLATE

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 20-25%

ACGIH TLV: 500 PPM


CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 5-10%


SURFACTANT

Fraction By Weight: 2-3%


SILICONE FLUID

CAS: 63148-62-9

Fraction By Weight: 1%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Effects of Overexposure:DIZZINESS, HEADACHE, NAUSEA. LONG TERM EXPOSURE
TO LIQUID MAY CAUSE DRYING AND CRACKING OF SKIN.

First Aid

First Aid:INGESTION- DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
INHALATION- REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST, OBTAIN
MEDICAL ATTENTION. SKIN- WASH WITH SOAP AND WATER. EYE- FLUSH WITH
WATER AT LEAST 15 MINUTES AND GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:95.0F,35.0C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:IRRITATING ORGANIC VAPORS ARE FORMED BY FIRE
OR THERMAL DECOMPOSITION.

Accidental Release

Spill Release Procedures:SOAK UP IN ANY INERT ABSORBENT AND STORE IN A
CLOSED CONTAINER UNTIL DISPOSAL.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT OR FLAME. AVOID
PROLONGED BREATHING OF FUMES. AVOID PROLONGED SKIN CONTACT.

Exposure Controls

Ventilation:MUST BE ADEQUATE TO AVOID EXCEEDING TLV.
Protective Gloves:IMPERMEABLE GLOVES RECOMMENDED.
Eye Protection:SAFETY GLASSES RECOMMENDED.
Supplemental Safety and Health

Chemical Properties

HCC:F4
Spec Gravity:0.99
pH: 7
Solubility in Water:PARTIAL
Appearance and Odor:WHITE CREAMY LIQUID, MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.

Disposal

Waste Disposal Methods:INCINERATE OR LANDFILL FOLLOWING EPA AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.